Product HandBook
ReelStrike
™
& Strike
™
1800 816 277
www.tti.com.au
24
Two-Yearly tasks
The following tasks are to be undertaken every 24 months or 500 operating hours, whichever occurs first.
#
Task
Date
Signed
1
All Daily, Weekly, Monthly, 3-Monthly & 6-Monthly
tasks
Maintenance Tasks
The following tasks must be undertaken on a periodic basis to ensure your ReelStrike & Strike’s ongoing
reliability. The frequency of these activities will depend on the nature of the operating environment and the
operational hours of the ReelStrike & Strike but as a minimum, the following tasks should be undertaken
annually.
Electric Pump
•
Check all fittings are firmly secured, tighten if necessary.
•
Inspect electrical cables and connections, repair or replace as necessary.
•
Unscrew the suction filter cover (refer to Figure 9) and remove the filter screen and gasket. Soak the
filter screen in clean water, brushing carefully with a nozzle brush. When re-assembling, ensure the
gasket is in position.
Trouble Shooting
If a fault develops with your ReelStrike & Strike unit, the following trouble shooting tables provides
guidance to identify and rectify the problem.
Pump
Problem
Possible Cause
Remedy
Pump will not prime
Air leak on suction line
Tighten or replace fittings
Pressure drops or
fluctuates during operation
Suction line restriction
Remove restriction
Pump sucks air
Tighten or replace fittings
No pressure
Broken regulator spring
Replace regulator spring
Summary of Contents for ReelStrike
Page 27: ......
