background image

9

MAINTENANCE

z

Use only original manufacturer's replacement parts,
accessories and attachments. Failure to do so may
cause poor performance, possible injury and may void
your warranty.

z

The blower attachment is maintenance free except for an
occasional check for debris that may have accumulated
on top of the fan. Strong vibrations during use is a sure
sign that something has become lodged in the fan. Stop
the engine, disconnect the coupling, remove the attach-
ment from the power head, and remove the debris.

z

Never operate a unit that is damaged, improperly
adjusted, or is not completely and securely assembled.

z

Always stop the engine and remove the spark plug wire
before making any adjustments or repairs.

z

Inspect the unit before each use for loose fasteners and
damaged or missing parts. Replace any parts that are
cracked, chipped, or damaged in any way. Failure to do
so can cause serious injury.

z

Make sure all handles are properly and securely at-
tached.

z

Never modify the unit in any way. Do not use for any job
except that for which it is intended.

z

For service, contact a servicing dealer.

STORING THE BLOWER ATTACHMENT

Store the blower attachment in a well ventilated place that
is inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts.

To remove the blower attachment from the power head for
storage:

1. Loosen the knob on the coupler device.

2. Push the button in, then twist the shafts to remove and

separate the power head from the attachment.

For storing information:

 Please refer to the operator’s

manual of your power head.

ATTACHING THE STORAGE HANGER

See Figure 4.

There are two ways to hang your attachment for storage.

z

  To use the hanger cap, push in the button and place the

hanger cap over end of the blower attachment’s shaft.
Slightly rotate the cap from side to side until the button
locks into place.

z

The secondary hole in the blower attachment shaft can
be used for hanging purposes as well.

BUTTON

HANGER CAP

SECONDARY HOLE

BLOWER ATTACHMENT SHAFT

Fig. 4

MAINTENANCE

Summary of Contents for Expand-it UT15519B













Reviews: