- 11 -
1.5 Product Introduction
Before use,Please make sure that you have read this before installing and using .
Device Power Connection:
Just only connect DVR with power supply, the power of cameras and monitors are all supplied by DVR,
aviation connectors is built-in DC 12V output.
★
Use ignition switch to control video record delay time working
★
Red cable connect positive of the car storage battery, black cable connect negative, while yellow
cable connect independent ignition switch or independent positive;
★
switch connection
（
Indoor test usually use this way
）★
Red cable and yellow cable together connect power positive of the car storage battery, while black
cable connect negative;
Camera connect AV IN, monitor connect BNC connector in AV out of PANEL.
If it’s not standard aviation connector, please use the aviation conversion line mentioned in the
addenda, Black side is DC 12V output, White side is Audio output, Yellow side is Video output;
Attention:
If the camera type and DVR
setting mode(AHD HD/Analog/Mixture) don’t match, then it will show
“video lost”,
in Mixture mode, 1,2CHANNEL is AHD high definition input, 3,4CHANNEL is analog
standard definition input;
In order to get better damping effect for HDD DVR,
please horizontally install DVR
.
Tips:
In the video preview interface, you can undertake the following actions :
Press F2 to enter Quick Setting, you can change the device number,server IP and port information;
Press LOGIN to enter the menu, direct input password: Administrator: 666666, User: 000000;
Press INFO to display the signal strength, dial-up connection status, hardware and software
versions, storage capacity, etc.;
Press 1.2.3.4 to enlarge the corresponding channel video, press 9 or ESC to return to four preview
videos.
Press the playback key
Directly start the video playback;
Device No. and Phone number must be the same , they are all Platform device ID
