16
5. PRODUCT INSTALLATION
Buddy BX1 - Cigarette Power Socket
- DIY Fitting
1. Attach the double sided adhesive
tape to the unit.
2. Secure the
Buddy BX1
to the
windscreen behind the rear view
mirror. Please make sure that the
surface is clean and dry before
attaching.
Tip:
Hold in position
with firm
pressure for
30 Seconds
3. Adjust camera view and make
sure the lens has an unobstructed
view.
4. Arrange the power cord neatly
alongside the windshield and
door pillar trim. Use the provided
wire splice clip.
5. Connect the
Buddy BX1
to the cigarette
lighter socket.
Buddy BX1 - Direct wiring
- Professional Installation Recommended
Please don’t attempt to permanently wire this unit
unless you are familiar with auto wiring.
Any incorrect installations will not be covered by
the warranty.
For a full wiring description,
please see section 2.1.
