C.
When checking oil, observe the following (refer to Figure 2-3):
(1)
Make sure the engine is in a level position.
(2)
Remove the oil filler cap/dipstick and wipe it clean.
(3)
Insert the filler cap/dipstick into the oil filler neck, but do not screw it in.
(4)
Remove the filler cap/dipstick and check the oil level.
(5)
If the level is low, fill to the top of the oil filler neck with the recommended oil.
(6)
Reinstall the oil filler cap/dipstick.
Operating Instructions
Page 7
Tsurumi’s Operation, Service, and Repair Manual
Figure 2-2: Oil Viscosity Grade-to-Temperature Recommendations
Figure 2-3: Checking Oil Level
Figure 2-2: Oil Viscosity Grade-to-Temperature Recommendations
