Tsuruga 471A, Quick Manual, Page: 44 / 48

10
Command list
Setting command
Required setting
command
Specified setting command
Command Response Command frame Response Setting item, range
Totalizing constant RC01 20 WC01 99999 99999 20～99999
Instant full scale
RC02 20000 WC02 10000 10000 20～20000
Cut off RC03 0 WC03 1 1 0～10%
Instantaneous display
cycle
RC06 1 WC06 1 1 0(100ms), 1(1s), 2(5s)
Totalized decimal
point
RC07 2 WC07 1 1
0(0), 1(0.0), 2(0.00),
3(0.000),4(0.0000),
5(0.00000)
Instant decimal point RC08 0 WC08 1 1
0(0), 1(0.0), 2(0.00),
3(0.000),4(0.0000),
5(0.00000)
Initial totalizing value RC09 0 WC09 999999 999999 0～999999
Display 1 switching RC10 0 WC10 1 1 0(Inst.), 1(Totalizer)
Display color RC11 0 WC11 1 1 0(RED), 1(GREEN)
Reset totalizing
function
RC12 0 WC12 1 1 1(ON), 0(OFF)
Synchronized
totalization pulse
division
RC13 0 WC13 1 1 0(1/1), 1(1/10), 2(1/100)
Synchronized
totalization pulse
width
RC14 0 WC14 1 1
0(100ms), 1(50ms),
2(10ms)
Display switch-off
function
RC15 1,99 WC15 1,99 1,99
0(Invalid)/ 1(All display)/
2(Display2), 0～99
Invalid of reset key RC16 0 WC16 1 1 0 (Invalid), 1(Valid)
Pause/Latch RC17 0 WC17 1 1 0(PAUSE), 1(LATCH)
Over display of
display 1
RC18 0 WC18 1 1 0(OFF)/1(ON)
AL1 Comparative
value
RC41 999999 WC41 999999 999999 0～999999
AL2 Comparative
value
RC42 999999 WC42 999999 999999 0～999999
AL3 Comparative
value
RC43 999999 WC43 999999 999999 0～999999
AL4 Comparative
value
RC44 999999 WC44 999999 999999 0～999999
Batch switching RC45 0 WC45 1 1 0(ALARM), 1(BATCH)
AL3 Output width
RC46 0 WC46 1 1
0(0.1s), 1(0.2s), 2(0.5s),
3(1.0s),4(Continuous)
AL4 Output width
RC47 0 WC47 1 1
0(0.1s), 1(0.2s), 2(0.5s),
3(1.0s),4(Continuous)
AL4 Auto reset RC48 1 WC48 0 0 1(ON), 0(OFF)
Analog output
switching
RC75 0 WC75 0 0 0(Inst.), 1(Totalizer)
Full scale of analog
output
RC79 999999 WC79 999999 999999 200～99999
Key protection RC00 1 WC00 0 0 1(ON), 0(OFF)