Tsuruga 471A, Quick Manual, Page: 27 / 48

25
Mode
Setting
(Item setting)
Mode
Setting
(Item setting)
Code No.46 『 AL3 Output width 』
Code No.47 『 AL4 Output width 』
Code No.48 『 Auto reset 』
During batching of AL 3 to 4, select the time
width with one shot of specified output.
Note) Continuous output is turned OFF by
RESET input.
Setting range ： 0.1s, 0.2s, 0.5s, 1.0s,
-- (Continuous)
During batching of AL3 to 4, when AL4 auto
reset is ON, reset is done when totalized value
becomes AL4.
If reset totalizing function is OFF, the totalized
value will be 0.
If teset totalizing function is ON, the totalized
value will be equal to initial totalized value.
Setting range ： OFF ､ ON
Change the output width of AL3 from 0.1 s to
0.2 s. Change of AL4 Auto reset from OFF to ON.
MODE
MODE
MODE
▲
SET
SET
SET
SET
▲
MODE
MODE
▲
To code No.setting
Code № 46
To measurement
operation
Displays of
current setting
Memory
ENTER
1sec.
change of setting
ENTER
1sec.
ENTER
1sec.
ENTER
1sec.
▲
SET
MODE
MODE
SET
SET
▲
MODE
SET
▲
MODE
ENTER
MODE
To Code No.setting
To measurement
operation
Code № 48
ENTER
1sec.
Displays of
current setting
Memory
ENTER
1sec.
ENTER
1sec.
1sec.
Change of setting