TSUNESS TSOL-A3.0K-H, User Manual

Page: 10 / 54

6
2.3 CE Directives
This chapter follows the requirements of the European low voltage directives, which
contains the safety instructions and conditions of acceptability for the end use system,
which you must follow when installing, operating and servicing the unit. If ignored, physical
injury or death may follow, or damage may occur to the unit. Read this instructions before
you work on the unit. If you are unable to understand the dang ers, warnings, cautions or
instructions, please contact an authorized service dealer before installing. Operating and
servicing the unit.
The Grid connected inverter meets the requirement stipulated in Low Voltage Directive
(LVD) 2014/35/EU and Electromagnetic Compatibility (EMC) Directive 2014/30/EU. The
unit is based on:
EN 62109-1: 2010; EN 62109-2:2011; IEC 62109-1(ed.1) ; IEC62109-2(ed.1)
EN 61000-6-3:2007+A: 2011; EN 61000-6-1:2007; EN 61000-6-2:2005
The grid connected inverter leave the factory completely connecting device and ready for
connection to the mains, the unit shall be installed in accordance with national wiring
regulations. Compliance with safety regulations depends upon installing and configuring
system correctly, including using the specified wires. The system must be installed only by
professional assemblers who are familiar with requirements for safety and EMC. The
assembler is responsible for ensuring that the end system complies with all the relevant
laws in the country where it is to be used.
The individual subassembly of the system shall be interconnected by means of the wiring
methods outlined in national/international such as the national electric code (NFPA) No.70
or VDE regulation 0107.