7/14
㩷 㩷
Note: Attach the hinge unit to the link installation area as follows.
㩷 㩷 㩷 㽲
If using a plastic hammer
㽳
If using your hands
㩷 㩷 㩷 㩷
Lay parallel in the mounting area and tap
Lay hinge diagonally and twist with hook
directly from above.
attached on one side.
㩷 㩷 㩷
Note: The part is small, so tap until it is firmly attached.
*TKC91 (closed type) lock stay
1) Lay a lock stay parallel to the installation area of a secured link. Then, tap lightly from directly above as
indicated by the arrows below to attach. Lock stays will not insert if they are misaligned. Forcing lock stays into
place may damage them. See cautions below if it is difficult to attach the stay.
Once the lock stay is firmly inserted follow these directions for the other side to attach.
Lay against link end and keep parallel.
㩷 㩷
Note: You will not be able to attach the stay if they are:
㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㽲
Tilted laterally
㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㽳
Not flush with the link end
㩷 㩷 㩷 㩷 㽴
Attachment area not parallel
