Security
Attention!
Before using the device, please read this manual attentively. Incorrect handling of this prod-
uct could possibly result personal injury or physical damage. The manufacturer assumes no
responsibility for any damage caused by mishandling that is beyond normal usage defined in
this manuall.
•
When using the stand, hold the sharpener at a distance from the edge of the working sur-
face. The fall of heavy metal construction even from a small height can lead to injuries.
•
When using a G-clamp to secure the body of the sharpening system to a table or work-
bench, make sure that the G-clamp is well tightened and the body is securely fixed to the
work surface.
•
Before starting of the sharpening process, be sure to install the bar stoppers. (Page 12)
•
During the sharpening, beware of accidental triggering of the rotary
gear, of the mechanism caused by weak fixation or excessive pressure on the abrasive.
Properly adjust fixation effort (page 8).
•
When installing, adjusting and during the sharpening work, protect your hands from cuts
on the sharp edges of a knife, use gloves.
•
Do not leave an open, not covered blade in the access zone of children and animals.
Maintenance tips
•
The machine have a security markings, in case of it’s breakage. Warranty does not apply.
•
To preserve the appearance and to prevent corrosion, periodically remove dust and dirt-
and wipe the places liable to the corrosion with a cloth slightly dampened with household
oil. Wipe dry with a tissue after.
•
For the lubrication of the moving couplings use liquid household oil.
•
Check the device before work. Make adjustments if necessary (see. Calibration, page 13).
•
Moving the abrasive holder bar during the process of sharpening should
be smooth and even, without any jerky motions or excessive pressure on the abrasive.
•
When the sharpening is finished, remove all the dirt from the device and carefully clean all
surfaces.
•
For the transporting, disassemble device in the reverse order. To avoid damage, wrap in
paper and put in a package (box).
•
For the long term storage we recommend to disassemble device in the reverse sequence
and remove to the package (box).
•
Store in a dark, dry place at room temperature. In wet climate, put the device in a box with
several packs of the humidity absorbers, and also lubricate with the household oil places
where corrosion may possibly appear.
•
Damage or the excessive wear of the threaded connections especially of the the adjust-
ing spring of the clamps may appear after long use. To prevent this, we recommend to
use the household oil as well as following the sequence of the manipulations with adjust-
ment screws. Timely replace clamping screws, to avoid its damage.
•
If any defect of the parts difficult to repair revealed, refer to the supplier of the product.
•
Dispose of as household waste.
7
