TSM DURASWEEP 170 Operating Manual Download Page 14

DURASWEEP 170

OPERATING MANUAL

V01

TSM - Technological Systems by Moro Srl

Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy

Tel. +39.0434.564167

-

Fax +39.0434.954069

www.tsmitaly.com – [email protected]

13

8

SAFETY REGULATIONS AND RESIDUAL RISKS

8.1

Regulations to be observed

This machine must be used only for the purpose for which it was expressly designed. The manufacturer cannot be

held responsible for any damage to persons, animals or things resulting from improper, incorrect or unreasonable use

of the machine .

BEFORE CARRYING OUT ANY CLEANING OR MAINTENANCE OPERATIONS, SWITCH OFF THE

MACHINE WITH THE IGNITION KEY

Do not remove any safety devices fitted on the machine.

Never start up the machine if the fixed and/or mobile safety devices have been removed.

In the event of a fault and/or bad functioning of the machine, switch it off, do not take any direct action

but apply exclusively to a service Centro authorised by the manufacturer, using exclusively authentic

spare parts.

Make the electrical connection as described in the chapter on ’installation.

Scrupulously follow the maintenance schedule.

The user is required to check that the environmental conditions are correct, (for example. frost or high

temperatures) in the place where the machine is to be kept, as these conditions may seriously affect its

performance and/or damage the machine itself.

In the case of a combustion engine, carefully read the warnings given in the engine user’s manual. In

any  case,  always  bear  in  mind  the  normal  safety  precautions  concerning  the  use  of  inflammable

substances.

Do not suck up toxic, harmful or inflammable substances.

This manual must always accompany the machine, wherever it goes.

8.2

Residual risks

When using  the  sweeper, great  attention  must be paid to the  so-called  residual  risk areas or  to  the  work

areas surrounding them, which can present danger for persons or things if the machine is used incorrectly

or  if  the  user  makes  an  error  of  judgement  or inattention,  omitting  to  follow  the  advice  given  in  this

manual.

There is a residual risk of fire and explosions due to the use and handling of fuel, in the case of models

with a combustion engine.

There is a residual risk of inhalation of fuel vapours due to the use and handling of petrol, in the case

of models with a combustion engine.

There  is  the  general  risk  due  to  movement  of  the  vehicle  (if  applicable,  see  also  the  rules  of  the

highway code).

There is a residual risk of coming in contact with the dirt con sucked up during the phase of manual shaking of the

filters and when emptying the hopper.

There is the risk of coming in contact with the overheated surface of the engine head.

There is the risk of knocking persons down due to inadequate use of the machine, or to distraction of the operator.

There is the risk of inhalation of carbon oxides by the operator due to the presence of the combustion engine.

In  the case  of  particularly  dirty  environments and cleaning operations,  there  is  the  risk of  inhalation of  dust so, in

these cases, it is advisable to wear a mask.

There is the risk linked with insufficient or inexistent maintenance which leads even to situations of serious danger.

There is the risk of crushing and pinching between the moving parts of the machine.

DURASWEEP 170

OPERATING MANUAL

V01

TSM - Technological Systems by Moro Srl

Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy

Tel. +39.0434.564167

-

Fax +39.0434.954069

www.tsmitaly.com – [email protected]

13

8

SAFETY REGULATIONS AND RESIDUAL RISKS

8.1

Regulations to be observed

This machine must be used only for the purpose for which it was expressly designed. The manufacturer cannot be

held responsible for any damage to persons, animals or things resulting from improper, incorrect or unreasonable use

of the machine .

BEFORE CARRYING OUT ANY CLEANING OR MAINTENANCE OPERATIONS, SWITCH OFF THE

MACHINE WITH THE IGNITION KEY

Do not remove any safety devices fitted on the machine.

Never start up the machine if the fixed and/or mobile safety devices have been removed.

In the event of a fault and/or bad functioning of the machine, switch it off, do not take any direct action

but apply exclusively to a service Centro authorised by the manufacturer, using exclusively authentic

spare parts.

Make the electrical connection as described in the chapter on ’installation.

Scrupulously follow the maintenance schedule.

The user is required to check that the environmental conditions are correct, (for example. frost or high

temperatures) in the place where the machine is to be kept, as these conditions may seriously affect its

performance and/or damage the machine itself.

In the case of a combustion engine, carefully read the warnings given in the engine user’s manual. In

any  case,  always  bear  in  mind  the  normal  safety  precautions  concerning  the  use  of  inflammable

substances.

Do not suck up toxic, harmful or inflammable substances.

This manual must always accompany the machine, wherever it goes.

8.2

Residual risks

When using  the  sweeper, great  attention  must be paid to the  so-called  residual  risk areas or  to  the  work

areas surrounding them, which can present danger for persons or things if the machine is used incorrectly

or  if  the  user  makes  an  error  of  judgement  or inattention,  omitting  to  follow  the  advice  given  in  this

manual.

There is a residual risk of fire and explosions due to the use and handling of fuel, in the case of models

with a combustion engine.

There is a residual risk of inhalation of fuel vapours due to the use and handling of petrol, in the case

of models with a combustion engine.

There  is  the  general  risk  due  to  movement  of  the  vehicle  (if  applicable,  see  also  the  rules  of  the

highway code).

There is a residual risk of coming in contact with the dirt con sucked up during the phase of manual shaking of the

filters and when emptying the hopper.

There is the risk of coming in contact with the overheated surface of the engine head.

There is the risk of knocking persons down due to inadequate use of the machine, or to distraction of the operator.

There is the risk of inhalation of carbon oxides by the operator due to the presence of the combustion engine.

In  the case  of  particularly  dirty  environments and cleaning operations,  there  is  the  risk of  inhalation of  dust so, in

these cases, it is advisable to wear a mask.

There is the risk linked with insufficient or inexistent maintenance which leads even to situations of serious danger.

There is the risk of crushing and pinching between the moving parts of the machine.

DURASWEEP 170

OPERATING MANUAL

V01

TSM - Technological Systems by Moro Srl

Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy

Tel. +39.0434.564167

-

Fax +39.0434.954069

www.tsmitaly.com – [email protected]

13

8

SAFETY REGULATIONS AND RESIDUAL RISKS

8.1

Regulations to be observed

This machine must be used only for the purpose for which it was expressly designed. The manufacturer cannot be

held responsible for any damage to persons, animals or things resulting from improper, incorrect or unreasonable use

of the machine .

BEFORE CARRYING OUT ANY CLEANING OR MAINTENANCE OPERATIONS, SWITCH OFF THE

MACHINE WITH THE IGNITION KEY

Do not remove any safety devices fitted on the machine.

Never start up the machine if the fixed and/or mobile safety devices have been removed.

In the event of a fault and/or bad functioning of the machine, switch it off, do not take any direct action

but apply exclusively to a service Centro authorised by the manufacturer, using exclusively authentic

spare parts.

Make the electrical connection as described in the chapter on ’installation.

Scrupulously follow the maintenance schedule.

The user is required to check that the environmental conditions are correct, (for example. frost or high

temperatures) in the place where the machine is to be kept, as these conditions may seriously affect its

performance and/or damage the machine itself.

In the case of a combustion engine, carefully read the warnings given in the engine user’s manual. In

any  case,  always  bear  in  mind  the  normal  safety  precautions  concerning  the  use  of  inflammable

substances.

Do not suck up toxic, harmful or inflammable substances.

This manual must always accompany the machine, wherever it goes.

8.2

Residual risks

When using  the  sweeper, great  attention  must be paid to the  so-called  residual  risk areas or  to  the  work

areas surrounding them, which can present danger for persons or things if the machine is used incorrectly

or  if  the  user  makes  an  error  of  judgement  or inattention,  omitting  to  follow  the  advice  given  in  this

manual.

There is a residual risk of fire and explosions due to the use and handling of fuel, in the case of models

with a combustion engine.

There is a residual risk of inhalation of fuel vapours due to the use and handling of petrol, in the case

of models with a combustion engine.

There  is  the  general  risk  due  to  movement  of  the  vehicle  (if  applicable,  see  also  the  rules  of  the

highway code).

There is a residual risk of coming in contact with the dirt con sucked up during the phase of manual shaking of the

filters and when emptying the hopper.

There is the risk of coming in contact with the overheated surface of the engine head.

There is the risk of knocking persons down due to inadequate use of the machine, or to distraction of the operator.

There is the risk of inhalation of carbon oxides by the operator due to the presence of the combustion engine.

In  the case  of  particularly  dirty  environments and cleaning operations,  there  is  the  risk of  inhalation of  dust so, in

these cases, it is advisable to wear a mask.

There is the risk linked with insufficient or inexistent maintenance which leads even to situations of serious danger.

There is the risk of crushing and pinching between the moving parts of the machine.

Summary of Contents for DURASWEEP 170



















Reviews: