TSM DURASWEEP 170, Operating Manual

Page: 11 / 18

DURASWEEP 170
OPERATING MANUAL
V01
TSM - Technological Systems by Moro Srl
Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy
Tel. +39.0434.564167
-
Fax +39.0434.954069
www.tsmitaly.com – sales@tsmitaly.com
10
6.4 Description of the controls
1.
Brake lock:
To lock the machine in the parking position pull the lever 12 pag.6.
2. Movement control pedal:
When the front part of the pedal 1 pag. 15 is pressed, the sweeper will move forward at a speed proportional to the
pedal stroke. When the rear part of the pedal is pressed, the sweeper will move backwards at a speed proportional to the
pedal stroke.
3.
Brake pedal:
Press the pedal 2 pag. 6 to operate the brakes.
4. Horn button:
Press the button to operate the horn.
5.
Emergency button:
Only in electric version
Press the button to stop the machine. Turn the button to switch it off.
6. Key switch
Insertion of key in OFF position: turn the key and keep it in position GL until the glow plug lamp goes out, continue
turning to position ST and release when the engine starts.
IMPORTANT: do not keep the key in the ST position for more than 10/20 sec. as this can damage the starter motor.
7.
Housing for switches, headlamps and blinking light
Housing for optional buttons.
8. Indicator light panel
Pag. 16
9.
Throttle control lever:
Only in petrol motor
1. Lever forward : the engine operates at minimum r.p.m.,
2. Lever backwards: increases the r.p.m. in proportion to the lever stroke.
10. Suction control button
Press the button to run the vacuum motor (1 pag. 8).
10.1 Hose suction control button
It is used to vacuum with the hose :
1) Close the FLAP : lever forward (6 pag. 6)
2) Switch off the vacuum motor (1 pag. 8)
3) Central brush off (lever backward) ( 5 pag. 6)
4) Enter the hose (9 pag 5 ) in the apposite hose housing ( 8 pag. 5 )
5) Switch on vacuum hose button ( 9 pag 6).
11. Central brush control lever
(5 pag. 6)
1. Lever backwards: central and side brushes rotate
11.1 Lowering central brush
(11 pag 6)
11.2
Central brush pressure adjustment
(10 pag 6)
12. Side brushes button
1. Pull the lever backward to run the central brush (5 pag. 6 )
2. Press the button (7 or 8 pag. 8 ) to run the side brushes
13.
Container lifting control lever
(7 pag.6)
1. Lever forward: the container is lowered
2. Lever back: the container is raised
DURASWEEP 170
OPERATING MANUAL
V01
TSM - Technological Systems by Moro Srl
Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy
Tel. +39.0434.564167
-
Fax +39.0434.954069
www.tsmitaly.com – sales@tsmitaly.com
10
6.4 Description of the controls
1.
Brake lock:
To lock the machine in the parking position pull the lever 12 pag.6.
2. Movement control pedal:
When the front part of the pedal 1 pag. 15 is pressed, the sweeper will move forward at a speed proportional to the
pedal stroke. When the rear part of the pedal is pressed, the sweeper will move backwards at a speed proportional to the
pedal stroke.
3.
Brake pedal:
Press the pedal 2 pag. 6 to operate the brakes.
4. Horn button:
Press the button to operate the horn.
5.
Emergency button:
Only in electric version
Press the button to stop the machine. Turn the button to switch it off.
6. Key switch
Insertion of key in OFF position: turn the key and keep it in position GL until the glow plug lamp goes out, continue
turning to position ST and release when the engine starts.
IMPORTANT: do not keep the key in the ST position for more than 10/20 sec. as this can damage the starter motor.
7.
Housing for switches, headlamps and blinking light
Housing for optional buttons.
8. Indicator light panel
Pag. 16
9.
Throttle control lever:
Only in petrol motor
1. Lever forward : the engine operates at minimum r.p.m.,
2. Lever backwards: increases the r.p.m. in proportion to the lever stroke.
10. Suction control button
Press the button to run the vacuum motor (1 pag. 8).
10.1 Hose suction control button
It is used to vacuum with the hose :
1) Close the FLAP : lever forward (6 pag. 6)
2) Switch off the vacuum motor (1 pag. 8)
3) Central brush off (lever backward) ( 5 pag. 6)
4) Enter the hose (9 pag 5 ) in the apposite hose housing ( 8 pag. 5 )
5) Switch on vacuum hose button ( 9 pag 6).
11. Central brush control lever
(5 pag. 6)
1. Lever backwards: central and side brushes rotate
11.1 Lowering central brush
(11 pag 6)
11.2
Central brush pressure adjustment
(10 pag 6)
12. Side brushes button
1. Pull the lever backward to run the central brush (5 pag. 6 )
2. Press the button (7 or 8 pag. 8 ) to run the side brushes
13.
Container lifting control lever
(7 pag.6)
1. Lever forward: the container is lowered
2. Lever back: the container is raised
DURASWEEP 170
OPERATING MANUAL
V01
TSM - Technological Systems by Moro Srl
Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy
Tel. +39.0434.564167
-
Fax +39.0434.954069
www.tsmitaly.com – sales@tsmitaly.com
10
6.4 Description of the controls
1.
Brake lock:
To lock the machine in the parking position pull the lever 12 pag.6.
2. Movement control pedal:
When the front part of the pedal 1 pag. 15 is pressed, the sweeper will move forward at a speed proportional to the
pedal stroke. When the rear part of the pedal is pressed, the sweeper will move backwards at a speed proportional to the
pedal stroke.
3.
Brake pedal:
Press the pedal 2 pag. 6 to operate the brakes.
4. Horn button:
Press the button to operate the horn.
5.
Emergency button:
Only in electric version
Press the button to stop the machine. Turn the button to switch it off.
6. Key switch
Insertion of key in OFF position: turn the key and keep it in position GL until the glow plug lamp goes out, continue
turning to position ST and release when the engine starts.
IMPORTANT: do not keep the key in the ST position for more than 10/20 sec. as this can damage the starter motor.
7.
Housing for switches, headlamps and blinking light
Housing for optional buttons.
8. Indicator light panel
Pag. 16
9.
Throttle control lever:
Only in petrol motor
1. Lever forward : the engine operates at minimum r.p.m.,
2. Lever backwards: increases the r.p.m. in proportion to the lever stroke.
10. Suction control button
Press the button to run the vacuum motor (1 pag. 8).
10.1 Hose suction control button
It is used to vacuum with the hose :
1) Close the FLAP : lever forward (6 pag. 6)
2) Switch off the vacuum motor (1 pag. 8)
3) Central brush off (lever backward) ( 5 pag. 6)
4) Enter the hose (9 pag 5 ) in the apposite hose housing ( 8 pag. 5 )
5) Switch on vacuum hose button ( 9 pag 6).
11. Central brush control lever
(5 pag. 6)
1. Lever backwards: central and side brushes rotate
11.1 Lowering central brush
(11 pag 6)
11.2
Central brush pressure adjustment
(10 pag 6)
12. Side brushes button
1. Pull the lever backward to run the central brush (5 pag. 6 )
2. Press the button (7 or 8 pag. 8 ) to run the side brushes
13.
Container lifting control lever
(7 pag.6)
1. Lever forward: the container is lowered
2. Lever back: the container is raised