6
TSM Products|1500 Clinton Street, Building 123| Buffalo, New York 14206 USA|www.tsmproducts.com
TROUBLESHOOTING:
PROBLEM
Cuber slides on counter when I try to use it.
POSSIBLE SOLUTION
1. Be sure there is no debris stuck to bottom of Base. Using a C-Clamp or
Vice-Grip, secure Cuber base to table top or counter.
2. Cuber has bolting holes in the bottoms of the legs for securing to larger
board such as worktable or cutting board.
PROBLEM
It is hard to turn the Hand Crank. Feels stuck.
POSSIBLE SOLUTION
1. Remove Housing and check for obstruction. Remove it, rinse if needed,
replace Housing and resume Cubing.
a. If NO obstruction. Check if Blades are coming into contact with
each other. If they are, adjust dislodged Roller to proper position.
2. If using meat cuts with bone or pieces of bone. STOP USE
IMMEDIATELY. This Cuber is not intended to Tenderize cuts with bones
inside.
If problems persist and/or if blades are damaged/bent, stop use and call our
customer care department : 1-716-824-5814.
