USP3 User Manual
Page
55
of
73
SELECTION
DESCRIPTION
Event Label
Manually enter, or cut & paste, the Event Label from the GTP-
32’s
or
DC20’s
Event Notification Table. The event label is case sensitive, may not contain
spaces, and must exactly match the Event Notification Table entry. (Refer to
the GTP-32 or DC20 User Manual.)
Value
Enter User Register value to match
STANDARD TALLY CONFIGURATION
1.
Click on the Tally Assignment Button. The Tally Assignment Page will be displayed.
2.
Click in the Tally Source column and select the tally source.
3.
Click in the Tally Type column and select the source tally type.
4.
Click in the Number column dropdown and select the event number.
5.
Click in the Tally Color column OFF dropdown and select the OFF Text backlight color.
6.
Click in the Tally Color column ON dropdown and select the ON Text backlight color.
7.
Click in the OFF Text field and enter the text that will appear on the front panel
switch face when the tally is off.
8.
Click in the ON Text field and enter the text that will appear on the switch face
during the tally ON state.
9.
Click in the OFF Font column dropdown and select the font size used by the OFF Text.
10.
Click in the ON Font column and select the font size used by the ON Text.
11.
Click in the Event Label column and enter the GTP-32 or DC20 Event Label. Label
spelling must match event label on the remote GTP-32/DC20. (Only available if
SOURCE= GTP32/DC20.)
12.
Repeat steps 2
–
13 to configure each switch tally.
13.
Click on the Save button to save changes. Changes will take effect immediately after
saving.
OR,
Click on any other page button to exit without saving changes.
GTP/DC EXTENDED TALLY CONFIGURATION
1.
Click on
the Tally Type dropdown and select “Follow GTP/DC Extended Tally”.
2.
Click in the Event Label field and enter the name of the Combinatorial Logic event
being tallied. The event names must follow this naming scheme:
ET_<Name>_<Status>
3.
Each event name must being with ET, followed by an underscore. The Name field
identifies the group of events that it belongs to. The Name field is followed by an
underscore, which is then followed by the Status field. The Status field identifies the
individual tally being received within the group.
