TSi Power ATS-500 Series, Manual

Page: 27 / 31

TSI Power Corporation MC80023,4,5,6,7,8,9,30
ATS-500 Series Automatic Transfer Switches Rev. 7, September, 2019
TSI Power Corporation Proprietary Information 27
6.17 MC80029 ATS-500 SERIES HARDWIRE INPUT, IEC OUTPUT 208, 220, 240 V,
MODELS 500-3811, -5811, -3011 AND -5011
SPECIFICATION ATS-500-3811 ATS-500-5811 ATS-500-3011 ATS-500-5011
ELECTRICAL
VA at 208 V 3120 4160
VA at 220 V 3300 4400
VA at 240 V 3600 4800
Current rating
15 A 20 A 15 A 20 A
Switching technology Mechanical relays
INPUT
Voltage range: 208 V
166 - 239 V ± 2.5 % nominal
Voltage range: 220 V or 240 V
184 - 264 V ± 2.5 % nominal
Frequency range 47 to 63 Hz, Caution: Both sources must use same nominal frequency
Transfer time Under one cycle
AC input connections Hardwire terminals
OUTPUT
Voltage / Current 208 V / 15, 20, 30 or 40 A 220 or 240 V / 15, 20, 30 or 40 A
Load regulation 1 % from no load to full load
Power efficiency 99 % or higher
AC distribution IEC60320 C-13 IEC60320 C-19 IEC60320 C-13 IEC60320 C-19
LED indicators: Green: Primary output, Yellow: Backup output, Red: Primary or backup AC is out of tolerance
Audible alarm Buzzer beeps when loss of primary or backup AC occurs
Audible alarm on / off Enable / Disable switch
Alarm contacts Rear-mounted DB-9 connector sends loss of primary / backup AC
PHYSICAL
Dimensions: Inches / mm W: 11.25" / 286 mm H: 3" / 43 mm D: 11.5" / 292 mm
Weight: lbs / kg 8 lbs / 3.63 kg
Wall or floor mount MK-4000C
ENVIRONMENTAL
Ambient temperature 32
°
to 104
°
F (0° to 40
°
C)
AGENCY APPROVALS
Safety UL 60950-1 Issue: 2007/03/27 Ed:2 UL Standard for Safety Information Technology
Equipment - Safety - Part 1: General Requirements - CSA C22.2#60950-1 Issued: 2007/03/01
Ed:2 Information Technology Equipment Safety Part 1: General Requirements
WARRANTY
Warranty Two year limited warranty covers parts and labor