2 Getting Started
Up and Running Overview
Getting Started
Up and Running Overview
1.
Place the QUESTemp
º
48N in the work area in a safe location approximately 3.5 feet
off the ground.
2.
Turn the unit
On
. If the battery voltage displayed during the power-on sequence is less
than or equal to 6.4 volts, replace or recharge the batteries.
3.
Be aware that the sensors require 10 minutes to stabilize to a new environment.
4.
In the main menu,
View
will be selected (an indicator arrow denotes the selected
menu). Press the
I/O Enter
key and the measurement screen will appear.
5.
Press the
Run/Stop
key to begin datalogging. Use the
Arrow keys
to set the display to
the desired items.
Placing the QUESTemp
º
48N on the Job Site
The QUESTemp
º
48N should be placed at a height of 3.5 feet (1.1 m) for standing individuals
or 2 feet (.6 m) for seated individuals. Tripod mounting is recommended to get the unit away
from anything that might block radiant heat or airflow. A 1/4" x 20 threaded bushing on the
bottom of the instrument allows mounting to a standard photographic tripod.
DO NOT
stand
close to the unit during sampling.
Before data logging, allow ten minutes for the sensors readings to stabilize.
Getting Started
