8 Operating QUESTempº 48N
View
Operating QUESTemp
º
48N
From a powered on mode, the main menu will
appear (after the start-up screens are
displayed.) Use the
Up Arrow
and
Down
Arrow
keys to move the marker in the display
in front of the desired mode. Pressing the
I/O
Enter
key will select the mode.
VIEW
SETUP
RESET
Figure 1-9: Main menu example
View
Displays the measured data but does not log it. If more than one set of sensors is plugged into
the unit, they can be displayed by pressing and releasing the
I/O Enter
key. The displayed
sensor set
is shown in the
upper right corner
.
View mode
Arrow icon Indicates you are in view mode
Event #
Last logged event/session
WET
53.9
º
F
01
DRY
113.5
º
F
Figure 1-10: Viewing measured data
NOTE:
To return to the main menu, hold down the
I/O Enter
key while a 3, 2, 1
countdown is shown in the lower right corner of the display.
Operation
