TSI Instruments N95-Companion 8095, Operation And Service Manual

Page: 19 / 47

Setting up the Model 8095 N95-Companion 11
7. Connect the N95-Companion to P
ORTA
C
OUNT
Plus interconnect tube
between the N95-Companion output (the right-most barbed fitting on
the front of the unit) and the P
ORTA
C
OUNT
Plus sample input (marked
"S" on the front of the P
ORTA
C
OUNT
Plus).
8. Connect the N95-Companion interconnect cable from the accessory port
on the back of the P
ORTA
C
OUNT
Plus to the matching port on the back
of the N95-Companion. The cable is the same on both ends.
Note: The black port on the back of the N95-Companion is used for
factory calibration only .
Interconnect
Tube
Interconnect
Cable
This Port For
Factory Use
Only