TSI Instruments HM685, Owner'S Manual

Page: 42 / 93

4-2 Hydronic Manometer Model HM685
Auto-Save
Logging In Auto-save mode, user samples are automatically logged
to memory at the end of the sampling period. To start
logging, press the
Read key.
Cont-.key
Logging In Cont-key Logging mode, logging starts by press the
Read key. The instrument continues logging until the Esc
key is pressed.
Cont.-time
Logging In Cont-time mode, readings start by pressing the Read
key. The instrument continues taking samples until the time
set in “Sample Time” elapses or the
Esc key is pressed.
L o g S e t t i n g s
Log Settings defines the frequency period with which the manometer will
log sample readings. When the Log Mode is set to Cont-Time, this setting
is also used to define the length of the test in hh:mm:ss.
Note: It is recommended that the logging interval must be set at a time
period that is greater than or equal to the current setting of the
time constant.