TSI Instruments DUSTTRAK 854001-M1, Assembly Manual

Page: 2 / 12

–2–
Contents
Contents ....................................................................................................................................................... 2
Product Overview ........................................................................................................................................ 2
MCERTS PM10 Indicative Certification .................................................................................................... 2
MCERTS PM2.5 Indicative Certification ................................................................................................... 3
MCERTS PM10 and PM2.5 Indicative Certification .................................................................................. 3
Installation and Set Up ............................................................................................................................... 3
Overview ................................................................................................................................................... 3
Assembly and Installation of Inlet Column ................................................................................................ 4
Installing the PM10 and PM2.5 Impactors (854020/854021) .................................................................... 4
Installing Heated Inlet (854041) into Environmental Enclosure ............................................................. 6
Heated Inlet Operating Instructions .......................................................................................................... 9
Heated Inlet Specifications ...................................................................................................................... 10
Instrument Setup ....................................................................................................................................... 10
Product Overview
The DustTrak™ Environmental Monitor is a data-logging, light-scattering laser photometer that provides
real-time mass concentration readings for aerosol contaminants such as dust, smoke, fumes and mist.
This instrument use a sheath air system that isolates the aerosol in the optics chamber to keep the optics
clean for improved reliability and low maintenance.
The below models are designed and set up to meet MCERTS (Monitoring Certification Scheme)
certification for indicative instruments.
All of the following items are required to meet the MCERTS
Indicative Certification:
MCERTS PM10 Indicative Certification
•
854201-M1 DustTrak
™ Environmental Monitor
•
854020 PM10 Impactor (must be installed)
•
854041 Heated Inlet with Omni-directional Inlet and water trap (must be installed)
•
PCF set at 0.53 (preset at the factory). It is recommended that the instrument is run with a
Photometric Correction Factor (PCF) of 0.53. However, the application of a site specific correction
factor may be used if a significant decrease in the expanded uncertainty can be demonstrated.