10
Chapter 2
10. The browser should let you know that the Wi-Fi
®
SSID (network
name) and password were saved successfully onto the monitors
shown below.
The device is now ready to communicate to the Wi-Fi
®
network. It
is recommended that you configure the monitor with the network
credentials, which will be present at the final installation location.
Then when you plug the monitor in after installation, it will connect
to that network and start transmitting data to the cloud.
11. Finally, move the Wi-Fi
®
switch back into the operate position so it
can connect to the local Wi-Fi
®
network.
The BlueSky
™ monitor will start uploading data to the cloud once
it connects to the Wi-Fi
®
network. After successful communication
with the local Wi-Fi
®
network and the cloud has been established,
the green LED should flash once every two seconds.
If the LED is flashing twice every second, with a 1 second pause
in-between, the monitor is trying to connect to the Wi-Fi
®
network,
but cannot. Try repeating the process for entering the Wi-Fi
®
network information to fix the problem.