Page 1
0
When replacing the Cutter Blade make sure the spring loaded Carbide Blades are firmly against the
back-side of the Cutter Blade (see yellow arrow in Fig. 18.) Use the Spanner Wrench, Fig. 14 page
10, to tighten Cutter Blade.
Once Cutting Blade and Stone have been replaced recheck your work. Upon everything being
properly replaced run the unit for a few minutes to sharpen the Cutting Blade and to seat the Stone
with the new Cutting Blade.
BE VERY CAREFUL WHEN HANDLING
OR CHANGING CUTTING BLADE!
Fig. 15
Fig. 16
Fig. 18
Fig. 17
