TSI Instruments 9510, Operation Manuals

Page: 71 / 89

Maintenance 5-3
4. Orient the wide part of the swab parallel with the back of the
unit and clean the entire interior of the inlet nozzle while unit
is sampling.
Note:
The unit’s blower will slow down or stop
while inlet is being cleaned.
!
W A R N I N G
Do not attempt to use a cleaning swab without the swab handle. An
improperly applied swab could get caught or stuck causing damage and
contamination.
5. Discard the used swab and repeat the cleaning process with
two (2) more clean swabs.
C l e a n i n g t h e I n s t r u m e n t E n c l o s u r e
To clean the enclosure, dampen a lint-free cloth and gently wipe
the surface until surface contamination is removed.