TSI Incorporated AEROTRAK 9306 Page 51 Operation Manual Download

Page: 51 / 77

Operation

3-29

Field

Description

Date

Date on which the data was collected.

Time

Time at which data was collected.

Temperature

Temperature at the end of the time the data was collected (if
probe connected during sampling).

Humidity

Humidity level at the end of the time the data was collected
(if probe connected during sampling).

Flow

Status of the flow. Options are: OK or ALRM. OK indicates
the flow rate is good; ALRM indicates flow rate is below the
defined setting.

Alarm

Alarm threshold was triggered (

Yes

) or not (

Inst

Status of the instrument hardware.

if no issues;

SRVC

instrument has a possible issue.

Vol

Volume of air that was sampled.

Record

This record number.

Records

Total number of records.

(continued on next page)

Summary of Contents for AEROTRAK 9306














































































Search results

Summary of Contents for AEROTRAK 9306

Reviews:

Related manuals for AEROTRAK 9306

Brands by name

Popular brands

TSI Incorporated AEROTRAK 9306, Operation Manual

Search results

Summary of Contents for AEROTRAK 9306

Reviews:

Related manuals for AEROTRAK 9306

Brands by name

Popular brands