CaloSys Modules
67
•
After you have discarded condensed water of separating bottle, carefully reconnect bottle to
tubing.
•
Select "Status/Calo" and check for proper "SampleFlow” on "Calo Current Values" dialog (see
Software Operating Instructions – Calorimetry, Section "Status Menu, Calo").
Connections Air Drying Unit
11.9.2.
Tubing length
The tubing connections from and to the Air Drying Unit should be kept as short as possible and must
not be kinked.
NOTICE
– Measurement errors!
The sensors in the Calorimetry Control Unit are sensitive measuring instruments that must be
protected against humidity. There should be no condensed water in the tubings via the O2 and
CO2 sensors.
Check the tubing regularly and discard any condensed water.
