CaloSys Modules
63
Fig. 34 Connections protection air filter
•
Cut the air tube coming from the air pump between the metal T-piece and the "Flow IN" of the
Control Unit.
•
Wrap threads of both protection air filter ends with sealing tape.
•
Slightly screw down the screw nuts to both filter ends and pass a tubing end through each of
the screw nuts.
•
Push the tubing ends over the two filter connections and then screw down the screw nuts
tightly so that the tubing cannot become loosened accidentally.
Filter installation
Ensure that the filter is inserted in the correct flow direction. There is a flow direction arrow on the
filter label.
Fig. 35 Flow direction