15
3.2 Loading the Ribbon
1.
Lift the handle to
open the printer
right side cover.
Push the print head
release lever to
open the print head
mechanism.
2.
Install the ribbon and
paper core onto the ribbon
supply spindle and ribbon
rewind spindle. Make sure
the ribbon & paper core
are set at the center of the
spindle. (User can refer to
the ruler on the spindles.)
3.
Thread the ribbon
through the ribbon
sensor slot and
then through the
open space in
between print head
and platen roller.
4.
Stick the ribbon onto the
paper core. Keep the
ribbon flat and without
wrinkle.
5.
Wind the ribbon clockwise
about 3~5 circles onto the
ribbon rewind spindle until
it is smooth and properly
stretched.
Ribbon
sensor
