TSC MH261T Series, User Manual

Page: 31 / 68

26

After clicking Set button, it'll pop-up the window tip
as below shown.

IP address will be shown in the
“IP address” field
and the Wi-Fi logo and IP address will be displayed
on the LCD control panel.
Note:
IP address should be shown within about 5~15
seconds after printer turn on. If not, please refer to
steps below to initialize the printer Wi-Fi module
settings then to setup it again.

Remove the cable between the computer and the
printer.

Go to main page, click Add Printer to add the
printer via Network .

Select the printer and enter the setting page by
double clicking the printer.

Click the Print Test Page button to print the test
page via Wi-Fi interface.