TSC CPX4P Series, Service Manual

Page: 201 / 232

197
Checking the Installation Space
1. The minimum space required for installation is shown below.
Installation Precautions
When installing Printer, observe the following precautions:
• Imaging faults can result due to dew condensation that occurs when the machine is moved from a cold
place to a warm place. Leave the machine kept packed for at least 2 hours before installing it.
(Dew condensation: When a metallic object is brought from a low-temperature place to a
high-temperature place, water vapor around it is cooled abruptly and consequently water drops stick to
the surface of the metallic object.)
•
Printer weighs about 24kg. At least two persons are required to install it. In addition, be sure to keep the
machine leveled when lifting it.
•
Be sure to wear a grounding wrist strap prior to the service work to prevent electrostatic destruction of
the printheads, PCB's, etc.