Doc. # 5016
BM-185D/285D/286D
Rev. A
Operation and Service Manual
3.5.2 Calibrate Electronics
This button brings up the Detector recognition and calibration window shown below.
3.5.2.1
Calibration To Do List
Gives the user a method to determine where in the calibration cycle the system is.
3.5.2.2
Event Log
Documents the specific steps that are occurring for each item listed in the Calibration To Do
List. This gives the user the opportunity to review the results of each step.
3.5.2.3
Detector Information
This screen gives a graphic representation of each detector in the system. The individual detector
box will flash when it is time for its calibration and the information box will display what the
user is to do.
PAGE 38
