teSentry
User Manual of Site Sentry ANPR/Speed Camera System
4
Cautions
1.
Make sure the power supply voltage is correct before using the camera system.
2.
Do not drop the camera or subject it to physical shock.
3.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth
with a small amount of ethanol and wipe gently.
4.
Do not aim the camera at the sun or extra bright objects. A blooming or flare may
occur (this is not a malfunction but may impair the endurance of the sensor over time)
5.
The sensor may be burned by a laser beam, so when any laser equipment is being
used, make sure that the sensor is not exposed to the laser beam.
6.
Do not place the camera in extremely hot or cold temperatures (the operating
temperature should be between -15
°C ~ +60°C, excessively dusty or damp locations
and do not expose to high electromagnetic radiation.
7.
To avoid heat accumulation, good ventilation is required for a proper operating
environment.
8.
While shipping, the camera system should be packed in its original packaging.
!
Summary of Contents for SiteSentry
Page 1: ...ANPR SPEED CAMERA User Manual...
Page 58: ......
