- 8 -
Troubleshooting
Trouble symptom
Reasons and possible solutions
When connecting a rechargeable battery after
a long period of storing the Recorder without
power supply, three-time flash of LED doesn’t
occur. There is faint lighting, chaotic flashing or
even the absence of respond instead.
Power supply is considerably discharged and
inapplicable to serve the Recorder. Replace
power supply with a fully charged one.
When supplying power the LED is flashing
incessantly
Damaged or absent firmware
Carry out firmware upgrade procedure, using
the corresponding program
When attempting to start recording from stand-
by mode the LED flashes three times and
gradually goes out.
There isn’t enough power supply to carry out
recording. Replace power supply
When attempting to start recording from stand-
by mode the LED flashes quickly three times
The Recorder’s sound memory is full.
Connect the Recorder to the PC and free all
necessary memory by deleting some of the
records (if necessary upload them onto the PC
beforehand).
Technical Support
Our engineers constantly work improving the software and documentation. You can always download
the last version of the program from our website for free.
Address: TS-Market Ltd. Building 10/1 Sosnovaya Alleya, Zelenograd, Moscow, The Russian
Federation, 124489
Tel: +7 (495) 638-8800; +7 (499) 940-95-75
(Cell) +7(903) 530-10-01, +7 (909)638-88-00
Fax: +7 (499) 735-0491
E-mail: [email protected]
http://www.ts-market.com
