- 7 -
Choose and download the necessary firmware from www.ts-market.com:
1.
Defence_FW_Updater_X_X,
where “x_x” is the number of the firmware version.
Insert the battery
2.
Prove “RecManager” isn’t launched. Otherwise close it.
3.
Run the updater program. Follow program’s instructions. The firmware will be upgraded, a
4.
corresponding message will be shown on the screen.
Please note!
All the recordings will be erased from the recorder’s memory.
After the firmware upgrade it is necessary to do Image recording, you’ll find the instructions
5.
below:
Image recording
Download the archive: ImageWriter program from our site www.ts-market.com or from the
1.
CD to the recorder Defence, if the CD is available.
From the downloaded archive run ETS16_ImgWriter.exe, which will record RecManager
2.
program into the built-in memory of the recorder. If your operational system is Windows
Vista, run this program “as an Administrator”.
Follow program’s instructions.
3.
When image recording has been completed connect the Recorder off the computer. After
4.
that connect it again. Now when connecting to the PC the Recorder will be recognized as
a removable media to store RecManager program.
After the connection with the Recorder has been performed the status bar of RecManager
5.
program displays information on new firmware version.
Format the Recorder’s memory with the help of RecManager program
6.
Restore factory settings with the help of RecManager program.
7.
Multilanguage Support
The RecManager program is available in both Russian and English. However, you can translate the
button names, messages, and etc. into other languages.
To do this download the Recorder’s CD image from our website http://www.ts-market.com RM_
ETS16(Defence)_Х_Х_ХХ.
For this, edit RecManager_rus.lng (or RecManager_eng.lng) file in the following way:
In the first file line, change the number of the page code into the code of your language.
1.
Translate all the messages and names from this file into your language and change them.
2.
Rename RecManeger_xxx.lng file (xxx- an abbreviation for the language).
3.
Then send the acquired file RecManager_eng.lng to Image files and launch image
4.
rewriting as described in “Image Recording”.
After you run the program next time, your language will be available.
If you want your language to be in the program installation, send the edited file to
[email protected]. The installation with your language support will be available on the TS-
Market website.
