Tryton THP1600, Instruction Manual

Page: 7 / 56

7
service and maintenance staff must become familiar with the 11. Rip fence
guidelines and be advised of the potential hazards. 12. Blade
13. Blade fixing screw
Also, the applicable occupational health and safety regulations
14. Washer
concerning accident prevention must be strictly observed.
15. Outer clamping flange
REMARK: Do not expose electric tools to rain or moisture.
16. Saw blade moving guard:
Any use of the saw that is not in observance with the above-mentioned
- open position (fig. A ),
purpose is forbidden, leads to the loss of warranty, and relieves the
- closed position (fig. B )
manufacturer from responsibility for the resulting damage.
Fig. B: 17. Spindle lock lever
Any modifications of the tool by the user relieve the manufacturer from
18. Switch
responsibility for any damage and injuries to the user and the
19. Safety pushbutto n
surroundings.
20. Cut depth scale
Proper use of the saw also pertains to maintenance, storage, transport,
21. Cut depth adjustment lever
and repairs.
22. Cord
The saw must only be repaired in service points designated by the
23. Hex key
manufacturer. Electric tools supplied from the mains must be repaired by
Fig. C 24. Inner clamping flange
properly authorized persons.
This is a multi-purpose manually guided tool with compact, ergonomic
Proper use cannot guarantee that no residual risk will occur. Due to the
design. It allows users to adjust the cutting depth and adapt the tool to
design of the machine, the following risks may occur:
material thickness as well as to cut at a specified angle to the material
ź
the operator may touch the saw blade in the unguarded part of the
surface (cutting plane is non-perpendicular to the material surface).
saw;
The tool provides safety thanks to the construction of self-adjusting
ź
the operator may touch the saw blade while it is moving (which will
cutting disk guard that automatically retracts during cutting process.
result in a cut);
The machine structure provides users also with easy-to-use buttons,
ź
the workpiece or its part may be thrown away by the saw;
locks and handles that are responsible for specific functions and
ź
the blade may crack/break;
maintenance/operation features.
ź
the operator may suffer a hearing injury due to the failure to use the
required hearing protection equipment;
TECHNICAL DATA :
ź
the operator may inhale the harmful wood dust while performing
work in closed premises.
The tool is not intended for professional or industrial use. The
guarantee will become void if the tool is used in professional
workshops, industrial plants, or for similar activities.
COMPONENTS:
ź
C ircular saw – 1 pc
ź
Rip fence – 1 pc
ź
Blade, Ø 185 x Ø 20 x 24T – 1 pc
ź
H ex key - 1 pc
ź
C arbon brush – 2 pc
ź
pc
pc
MACHINE STRUCTURE :
The circular saw is a tool in protection Class II (double insulation)
and it is powered with a single-phase motor.
Its structure is shown in the pictures on the pages 2-3:
The vibration level value given refers to basic application of the tool. If the
Fig. A: 1. Saw dust ejection
tool is used for other applications or with other tools, or if it is not
2. Grip
maintained properly, the vibration level may differ from the values
3. Saw blade guard grip
given. The above-mentioned causes may lead to higher exposure to
4. Ancillary grip vibrations during the whole work time.
5. Bevel angle scale
One must implement additional safety measures to protect the operators
6. Cut angle adjustment lever from exposure to vibrations, such as maintenance of the electric tool and
7. Rip fence adjustment screw
work tools, assurance of proper hand temperature, or determination of
the sequence of work operations.
8. Saw foot
o o
9. Marks indicating the line of cut with the foot set at 0 and 45
The declared total vibrations and declared noise emissions were
angle measured in accordance with a standard test method and may be used
10. Arrows showing the blade rotation direction for tool comparison.
Instruction manual - 1
ź
Warranty card - 1
Rated voltage
230-240 V
Rated frequency
50 Hz
Power consumption
1600 W
Rotational speed max.
5000 rpm
Saw blade diameter, max. 185 mm
ø
Cutting depth, max.
63 mm
Cutting angle
o o
0 45 ~
Saw blade diameter inner
Vibration level acc. to: EN 60745-1:2009
2
a =1,749 m/s
h
(
2
Measurement tolerance K=1,5 m/s )
Weight
4,6 kg
Protection class II /
Sound pressure level (LpA) , (KpA: 3 dB) 93,4 dB(A)
Sound power level (LwA) , (KwA: 3 dB) 104,4 dB(A)
ø 20 mm