Trynex SnowEx Vee Pro 3000, Owner'S/Operator'S Manual

Page: 39 / 44

© Trynex International 2007 L1102
5 — 39
Troubleshooting
SP-3000, SP-6000 and SP-8000 Material Flow
NOTE: Optional Optimum Flow Kit Available, To Increase Material Flow
* Spreader capable of speading most granular bulk material, including
coarse 50/50 salt/sand mix with Optimum Flow Kit.
MATERIAL
FREE FLOWS
MATERIAL ISSUE
CHECK BAFFLE
LENGTH
18" CORRECT
MATERIAL ISSUE
CHECK BAFFLE
POSITION
SHOULD TOUCH HOPPER
ON 3 SIDES
MATERIAL
DOES NOT FLOW
MATERIAL ISSUE
AUGER RUNS
PROPER DIRECTION
AUGER RUNS
BACKWARDS
REPLACE VEHICLE
HARNESS
CHECK CONNECTIONS
AT AUGER MOTOR
FOR REVERSE POLARITY
POLARITY CORRECT
REPLACE SPREADER
HARNESS
MATERIAL
OBSTRUCTION
REMOVE
OBSTRUCTION
AUGER RUNS
BACKWARDS
RUN 12 VOLT TO
AUGER CIRCUIT ON
SPREADER POWER CORD
TURN ON
VIBRATOR
SLOW
MATERIAL
FLOW
TURN ON
VIBRATOR
INCREASE
AUGER SPEED
MATERIAL ISSUE
SNOWEX DIAGNOSTIC TEST KIT (STK-020) IS AVAILABLE TO ACCURATELY DIAGNOSE ANY ISSUES WITH SNOWEX SPREADERS.
CALL YOUR DEALER FOR DETAILS.