manualshive.com logo in svg

Trycom Technology TRP-C31S, User Manual, Page: 6 / 28

Share
Download
Trycom Technology TRP-C31S User Manual Download Page 6

ECHIPAMENTE PENTRU AUTOMATIZĂRI

Electric Film S.R.L.  —  Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu

 VÂNZĂRI ▪ 0364 710319 ▪  [email protected] ▪ SUPORT TEHNIC ▪ 0788 250583 

cele mai sensibile

 

6

A straight-through Ethernet cable can be used to connect TRP-C31S to an Ethernet 

hub, switch, or wall plate. A crossover Ethernet cable can be used to make a 

connection directly to the NIC (Network Interface Card) on a PC or laptop 

 

STEP3:

 Connect TRP-C31S with RS232 or RS422/485 serial device. 

 

The TRP-C31S has one DB-9 male connectors for RS232 connection and a screw 

terminal connector for RS422/485 connection.   

 

The DB-9 serial port is configured as a DTE (data terminal equipment) device. A null 

modem cable is required to make a connection between the COM port on a PC and 

the TRP-C31S serial port. A straight through cable is required to connect the 

TRP-C31S serial port to a DCE device. 

 

The screw terminal connector accepts AWG #12 ~30 wires 

 

4-1. RS485 Wiring 

The RS-485 mode supports the Transmit and Receive channels using 2-wire half-duplex 

operation.  

 

4-2. RS422 Wiring 

The RS-422 mode supports 4 channels with full duplex operation for Receive, Transmit, the data 

lines are in differential pairs.   

 

Summary of Contents for TRP-C31S





























Reviews:

No comments