manualshive.com logo in svg

Trycom Technology TRP-C31S, User Manual, Page: 18 / 28

Share
Download
Trycom Technology TRP-C31S User Manual Download Page 18

ECHIPAMENTE PENTRU AUTOMATIZĂRI

Electric Film S.R.L.  —  Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu

 VÂNZĂRI ▪ 0364 710319 ▪  [email protected] ▪ SUPORT TEHNIC ▪ 0788 250583 

cele mai sensibile

 

18

STEP3. 

Enter

 

the COM Port number that TRP-C31S connect using, click “OK” 

 

 

STEP4.

 Press the “

Space bar

” the TRP-C31S firmware setting screen will show.   

 

 

You can set the TRP-C31S by Console mode. 

 

7-3.Using Telnet 

Telnet can be used to configure the TRP-C31S Serial Server from any PC on the LAN. The 

Telnet window displays the same configuration information shown in Console Mode and allows 

server properties to be configured. See chapter 6 for details on Server Properties.   

   

Ensure the PC and TRP-C31S are connected to the LAN, and the serial server is in RS-232, 

RS-422 or RS-485 mode before you can telnet to it and access the configuration screens. From 

the 

Desktop

, click 

Start

, and then 

run. 

The Run dialogue box will open. Type in Telnet

 

and the IP 

address of the Serial Server

 

which

 

to be configured, click 

OK

.  

Summary of Contents for TRP-C31S





























Reviews:

No comments