REMOVING THE COVER
To remove the cover from the side rails, push up on the retainer tab and then slide the header guide away from the side rail. Do this on
both the driver and passenger side. Carefully lift the cover off the side rails.
Push Up To
Release
Slide Header Guide To
Slide Header Guide To
Disengage.
Disengage.
Passenger
Side Shown
Header Guide
Retainer Tab
To drive with the cover in the open position, pull the latch towards
you to release the cover (located on driver side rail).
Roll the cover
toward the cab of the truck, making sure that both
sides roll
evenly. Secure the cover by placing both retainer hooks into the
retainer loops.
You are ready to drive with the cover in the
open
position.
COVER IN THE OPEN POSITION
D
isengage the
retainer hooks from the retainer loops and
unroll the cover
towards the tailgate.
9
10
11
NOTE:
If the tailgate has a key lock, the cover is secured until
the tailgate is unlocked and opened.
CLICK
A clicking sound will indicate a correctly installed cover. Next
secure the hook and loop fastener along the entire length
of both side rails before driving the vehicle. Simply run your hands
down both sides of the cover to achieve this. This will prevent wind
from lifting the cover and causing possible damage.
You are ready to
drive with the cover in the closed position.
Place the rear header into the header stops which are
located on both side rails. Rotate the rear header downwards
until you feel the cover latch in place.
Rear Header
Header Stop
Trigger Latch
NOTE:
We recommend closing the tailgate first and then closing the cover.
Pull Latch
Retainer Loop
Retainer Strap
Retainer Loop
Retainer Strap
Retainer Hook
TruXedo Inc.
• 2209 Kellen Gross Drive Yankton, SD 57078 • 877-878-9336 • truxedo.com ©TruXedo Inc., 2021
Part# 1118085 Rev. C 03.10.2021
