TruVision TVR-40 User Manual Download Page 50

Page: 50 / 66

HD-TVI DVR User Manual

①

The network setups are the same as step one to step four of point 1 on WAN of IE

remote surveillance.

②

Enter WAN IP and http port in the Safari browser to install the Active control. The

concrete steps are the same as step 5 and 6 of Chapter 7.2.1.

2. Connect the DVR to internet directly.

①

The network setups are the same as step one of point 2 on WAN of IE remote

surveillance.

②

Enter WAN IP and http port in the Safari browser to install the Active control. The

concrete steps are the same as step 5 and 6 of Chapter 7.2.1.

7.4 The Remote Live Preview

Fig 7-1 Remote Live Preview Interface

Channel indicator

Screen display mode

Volume

Start recording

Snapping picture

Start IE record

Bidirectional talk

Playback

PTZ control

Master/sub stream status

Note: Click

button to start recording. The record file will be saved in user’s PC.

Screen display mode:

Click the

icon beside the screen display mode to select channels.

Summary of Contents for TVR-40


































































Search results

Summary of Contents for TVR-40

Reviews:

Related manuals for TVR-40

Brands by name

Popular brands

TruVision TVR-40, User Manual

Search results

Summary of Contents for TVR-40

Reviews:

Related manuals for TVR-40

Brands by name

Popular brands