HD-TVI DVR User Manual
16
4.3.3 Time
①
Go to Menu
Setup
Record
Time interface to set recording time. Refer to Fig 4-12.
Fig 4-12 Record Configuration-Time
②
Set Pre-alarm record time and post-alarm record time. Select “All” to set the same
settings for all channels.
Pre-alarm Record Time:
Set the time in seconds to pre-record before the actual
recording begins.
Post-alarm Record Time:
Set the time in seconds to post-record after the actual
recording has finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Expire Time:
Set the expiration time for recorded video. If the set date is overdue, the
recorded files will be deleted automatically.
③
Click “Apply” to save the setting.
4.3.4 Stamp
This provides an option to enable or disable the Camera Name and the Time stamp on the
video. The user can also choose a position for the stamp on the screen
.
To set up stamp as follows:
①
Go to Menu
Setup
Record
Stamp interface. Refer to Fig 4-13.
Parameter
Meaning
Rate
720P/960H/D1: 1-30
（
NTSC
）
/1-25(PAL); 1080P: 1-15
（
NTSC
）
/1-12(PAL)
Resolution
This series supports D1, 960H, 720P, 1080P
Quality
The higher the value is, the clearer the recorded image is. Six options:
lowest, lower, low, medium, higher and highest.
Encode
VBR and CBR.
Max bit stream
You shall adjust it subject to the actual network condition.
