Rev: B
Vizion Install Appendix E C180, C182-
C182D, C185
TruTrak Doc: 255
31
4)
ROTATE
KNOB to select a MIN AIRSPD of (Refer to aircraft POH and set a value
equal to
1.3 V
S
in knots).
5)
PRESS
ALT button to advance to next setup screen.
6)
ROTATE
KNOB to select a MAX AIRSPD of (Refer to aircraft POH and set a value
equal to
0.9 V
NE
in knots).
7)
PRESS
ALT button to advance to next setup screen.
8)
ROTATE
KNOB to select a PITCH REV of
N
.
9)
PRESS
ALT button to advance to next setup screen.
10)
ROTATE
KNOB to select a STATIC LAG of
1
.
11)
PRESS
ALT button to advance to next setup screen.
12)
ROTATE
KNOB to select a MICROACTIVITY of
5
.
13)
PRESS
ALT button to advance to next setup screen.
14)
ROTATE
KNOB to select a HALF STEP of
N
.
15)
PRESS
KNOB exit vertical setup and return to the home screen.
16)
Cycle power on the autopilot.
For Vizion software version PV.40 follow the steps below:
1)
PRESS and HOLD
ALT button until VRT ACTIVITY is shown.
2)
ROTATE
KNOB to select a VRT ACTIVITY of
16
.
3)
PRESS
ALT button to advance to next setup screen.
4)
ROTATE
KNOB to select a MIN AIRSPD of (Refer to aircraft POH and set a value
equal to
1.3 V
S
in knots).
5)
PRESS
ALT button to advance to next setup screen.
6)
ROTATE
KNOB to select a MAX AIRSPD of (Refer to aircraft POH and set a value
equal to
0.9 V
NE
in knots).
7)
PRESS
ALT button to advance to next setup screen.
8)
ROTATE
KNOB to select a PITCH REV of
N
.
9)
PRESS
ALT button to advance to next setup screen.
10)
ROTATE
KNOB to select a STATIC LAG of
1
.
11)
PRESS
ALT button to advance to next setup screen.
12)
ROTATE
KNOB to select a MICROACTIVITY of
5
.
13)
PRESS
ALT button to advance to next setup screen.
14)
ROTATE
KNOB to select desired DEFAULT VS (this is the vertical speed setting
that the autopilot will use as the value to determine whether or not to
synchronize to current vertical speed or synchronize to zero vertical speed, as
well as the default vertical speed for altitude pre-select). For example, if the
DEFAULT VS is set to 300 fpm, if the aircraft is climbing at 200 fpm, the autopilot
select zero VS upon engagement. If the aircraft is climbing at 400 fpm, the
autopilot will select 400 fpm upon engagement.
We suggest using 300-500 feet per minute.
CAUTION!
Do not select a DEFAULT VS that is too high, or autopilot
performance may be adversely affected.
15)
PRESS
KNOB to exit vertical setup and return to the home screen.
16)
Cycle power on the autopilot.
