Trusted Clean TPL-17-200-CE-HEAT-TCP, Owner'S Manual, Page: 5 / 13

POWERMATE 1204ACH
IMPORTANT:
1204AC
H
is for use with
all heated Galaxy extractors.
1. Connect the cord on the power wand to the optional receptacle in back of the machine.
Turn on the vacuum and pump switches.
2. The motor for the power brush is turned on and off by a lighted rocker switch
located on the top of the base. Solution application is controlled by squeezing
the solution valve lever.
3. To move the power wand forwards, push the wand handle downward, raise
the front end and push the wand into position using the rear wheels. To pre-
spray, squeeze solution valve lever while moving wand forward and backwards
over the area to be pre-sprayed.
4. To clean, lift the wand handle to insure the nose of the wand is against the
carpet, then while squeezing the solution valve lever, pull the wand towards
you.
Here’s how it works
- the solution is jet sprayed deep into the carpet
to loosen the dirt. The brush scrubs the fiber and breaks up surface
and deep dirt. It fluffs the nap without distortion to the pile. With the
weight of the base on the suction head, the vacuum picks up the dirt
and solution. Make overlapping passes to prevent streaking.
5. Go over the path you just cleaner without squeezing the solution valve lever to
remove as much dirt and solution as possible.
POWERMATE 1800AC-200
IMPORTANT:
1800AC-
2
00 is for use with
all heated Galaxy extractors.
1. Connect the cord on the power wand to the optional receptacle in the back of the machine. Turn on the
vacuum and pump switches.
2. The motor of the rotating power brush is operated with your right hand controlling a long toggle switch.
Pull it up for momentary use, push it down for continuous brush action (center off). Solution application is
controlled by depressing the flow switch lever with your right hand fingertips.
3. To adjust the handle into operating position, pull up the grip on the locking lever located near the base of
the handle. Move the handle to waist level height and push down grip handle on lever to lock into place.
4. To move the power wand forward, push handle downward to raise the front end and move the wand into
position. To pre-spray, depress the flow switch lever (solution control) while
moving wand forwards or backward over the area to be cleaned with the front
end raised.
5. To clean, depress the solution flow lever while pulling the power wand towards you.
Here’s how it works-
the solution is jet sprayed deep into the carpet
to loosen dirt. The rotating brush scrubs the fiber and breaks up surface
and deep rooted dirt. It fluffs the nap without any distortion to the pile
With the weight of the base on the suction head, the vacuum picks up
the dirt and solution. Make overlapping passes to prevent streaking.
6. Make a pass over the path you just cleaned without depressing the solution flow
lever (vacuum only) and with the brush
still on to remove as much dirt and solution
as possible.
14 15
13
11
12
10
3
1
2
7
6 5 4
17 18 16 20 19 21
27
24
26
22 23
25
28
29
30
31
32
33
34
35
38
39
40
41
42
34
43
44
45
46
47
47
48
5 49
51
52
37
36
8
2000FX-HR
Upper
1-26-08
2000FX-HR
Upper
1-26-08
36
6
4
50
9B
9A
9A
9C
9D
9
9A
9B
9C
9D
ITEM
NO.
PART NUMBER DESCRIPTION QTY.
1 F11787 Solution Tank 1
2 F11792 Recovery Tank 1
3 F11791 Lid, Solution Tank 1
4 A00060 3-8 Barb X 1-4MP, Brass 2
5 A00052 90 Elbow, .25MP X .25FP 3
6 C11244 Washer, .56 X 1.5 X .05 3
7 00580-16.5 in-PH-A Hose Asm, 16.5 in X .25 in 1
8 E11124 Gasket, Recovery Tank 1
9 12904A Stand Pipe Assembly 1
K11965 Elbow, 180 Deg. Float Ball 1
K00672 Pvc Pipe, 1.5 X 12 in, Sch 40 Wht 1
K00741 Adapter 1
10989-2A Float Ball Screen 1
10 F11785 Lid, Recovery Tank 1
11 C12039 Washer, 1-4 X 1, SS 2
12 C02322 1-4 X 20 Bolt 2
13 B11769 Extension Cord, 12-3 SJTW 2
14 C11177 Velcro Strap 2
15 H02548-2 Label, Important, Cord 2
16 B00185-30 Wires, 73 in 2
17 B00185-40 Wires, 73 in 2
18 B010314 Wire Harness 1
19 F11786 Handle 1
20 B00177 Terminal Lug, Female, QD, .25 X .032, 16-14 AWG, Fully Insulated 4
21 B00185-40 Wire,14 GA Black, UL1015, 10 in 1
22 C00295-1 #10 X .75in Pan, Black SMS, Phillips 2
23 C00293 #8 X .5in Pan, Black SMS, Phillips 2
24 D11168 Cover, Switchplate 1
25 B02211-1 Switch, Rocker, Green Light 3
26 D010284 Switchplate 1
27 E010453 Gasket, Switchplate 1
28 B00177-1 Terminal Lug, Female, QD, .25 X .032 2
29 B00185-30 Wire,14 GA White, UL1015, 10 in 1
30 C02315 Lockwasher, #10 Int. Str, SS 2
31 C00264 Nut, 10-32 1
32 C11141 Screw, Allen Head, 10-24 X 1.25 in 8
33 K00665-1 Hose Adapter, 1.5in, Black 1
34 E11128 Gasket, Drain Valve 2
35 C00313 Hex Bolt, 1-4 X 20 X .5 SS 6
36 C00233 Washer, Flat, .25 in 8
37 C02312 Lockwasher, .25 in., Internal Star 2
38 D010283 Plate, Heater Mounting 1
39 F11804 Heater Mount 1
40 C00261 Nut, .25-20, Hex 2
41 K00710 Elbow, Drain Valve, Black 1
42 K00711 Drain Valve, Black 1
43 C00254 Lock Washer, 1-4in Split 2
44 C02294 Screw, 1-4 20 X 1.25 2
45 K11185 Elbow, 90, 1.5 in, MT-MS, PVC 1
46 K00672-1 Pvc Pipe, 1.5 X 2.25 in, Sch 40 Wht 1
47 E11129 Gasket, 5 ft. Long 1
48 A90004 .50 Barb X .25 MP, Brass 1
49 D00373 Inlet Filter, .25 NPT 2
50 A00124 Hex Nut, .25 NPT Brass 2
51 C11143 Screw, 1-4 20 X 1.5 in, SS Pan Head, Phillips 2
52 S11179 Non-Skid Tape, 1 in. Roll 1