Sight Fighter Digital Plus
5
3. Installation
Note:
The Sight Fighter Digital Plus does not work in DOS or Windows 3.11.
Note:
To use the game pad, DirectX 6.0 (or higher) must be installed onto your
system before installing the game pad. This is included on the CD-ROM.
Note:
Remove all existing joysticks from the 'Game Controllers' before starting
the installation of the Sight Fighter Digital Plus.
If you use Windows 95, the game pad must be connected to your sound card's game
port. For Windows 98, you can either connect the game pad to your sound card's
game port or to the USB connection. It is recommended that you use the USB port for
Windows 98.
3.1 Game port connection
1. Turn off your computer.
2. Connect the 15 pin game pad connection (figure 1, A) to your sound card's game
port.
3. Turn on the computer and start Windows. See chapter 3.3 to install the software.