Communicator ISDN 128 PCI
6
7.
After the driver has been installed, the ‘NDIS-WAN’ driver will be
installed automatically. Enter ‘A:\WIN95’ once more as the
location of the driver if Windows asks. You will also need the
original Windows CD.
8.
After the installation, you must re-start your computer. Remove
the disk from the driver.
2.3.2 Windows NT 4.0
Note:
The Trust Communicator ISDN 128 has been tested with
Windows NT with Service Pack 3. Other versions can
work, but have not been tested. If you use the upgrade
CD for Service Pack 3, re-install it after the completion of
the entire installation of the ISDN adapter.
Complete the following steps to install your ISDN adapter in Windows
NT4.0:
1.
Start Windows NT4.0.
2.
Sign on as ‘Administrator’.
3.
Go to ‘Network’ in your Control Panel (Start, Settings, Control
Panel, Network).
4.
Click on the tab ‘Adapters’.
5.
Click on ‘Add...’. After a few moments, a list containing Network
adapters will appear.
6.
Insert into drive A the disk marked with the label ‘Windows NT
Drivers’.
7.
Click on ‘Have Disk...’.
8.
Type [A:\WINNT’] into the input field and click on ‘OK’.
9.
Select ‘Trust ISDN adapter’ and click on ‘OK’. Figure 2 appears.
