DC-4700 POWERCAM OPTICAL ZOOM
9
2. Basic Still Image Capturing
- Capturing your favorite or important moments or subjects of concern
1. Turn the Mode Dial to
(
Still Image Capturing mode
), and LCD will be automatically turned on
with a red focus cursor in the center.
2. Frame your subject in your preferred pose and hold the camera steadily with both hands
3. Ensure the lens and flash are not blocked by your finger or strap.
4. Press and hold the shutter button halfway down to lock the focusing on the subject.
When the focus cursor turned to green, the focus has been adjusted and is ready for
image capturing., or check AF LED.
5. Press the shutter button fully to capture the image.
Zoom to the desired image sizes
Press
for telephoto; zoom in your subject, or
Press
for wide angle; capturing an entire scenery or coverage.
Digital Zoom for further enlargement
Press
continuously until the end of the scale and press further to enter into the Digital Zoom mode.
(5 step digital zoom: 1.6x, 2.2x, 2.8x, 3.4x and 4.0x). The subject image will be digitally enlarge and
enhance with the Digital zoom feature.
Press
to reduce the scale of the Digital zoom, and exit the Digital Zoom mode.
Hot-keys for more selections
Press
c
to enable Macro mode
Macro Mode – For close-up photography (10-50 cm)
Press
e
for using flash mode
Auto
Fill-in
Auto with the redeye reduction
Off
Press
f
to enable Self-timer or press twice to enable Continue shots, or press three times to
enable voice memo
Self-timer
1.
The enabled Self-timer icon will be displayed at top left corner of the LCD
2.
Press the shutter button to begin the countdown.
Shutter button
