DC-4700 POWERCAM OPTICAL ZOOM
6
LCD Status icons
Charging battery pack
1. Connect the AC plug cord to the battery charger and insert the power plug into the power source outlet.
2. Insert the battery pack (NB-1L model) into the charger as illustrated below with the arrow symbol
pointing towards the charging point.
3. The Charging will begin once power is turned on and the LED will turn red in colour.
4. Once completed, remove the battery pack from the battery charger.
Battery pack installation and uninstallation
- Be sure to turn off your camera when open the battery/SD card cover
1. Open the Battery compartment / SD Card cover by sliding the cover in the direction of the printed arrow.
2. Slide in (Arrow side facing the front of the camera) or Pull out the battery pack from the battery
compartment.
3. Close the Battery compartment / SD Card cover by closing the cover and slide back towards the body to
lock.
Charging Points
Arrow pointing towards Charging Points
Red LED will light up during charging
2304 x 1712
2720 x 2016
