Trust Ami Track Dual Scroll
14
6.4.2.7 ‘<Insert Separator’ button
There is also an ‘<Insert Separator’ button in the window shown in figure 12.
After you have made a command list, it is then possible to insert horizontal lines in the list. This can be used
to separate different components from each other and to arrange the list more conveniently.
This is carried out as follows:
1. Use the mouse to click on the command list you have made (figure 12, middle list) and select the
position where you wish to add the 'Separator Line'.
The line will be added above the selected command.
2. Click on the ‘<Insert Separator’ button. A horizontal line will be added to the list.
6.4.2.8 Move commands
It is also possible to move commands and separator lines in the command list you have made.
1. Click on the command or separator line you wish to move. A blue bar will be visible.
2. Next, click on the 'Arrow Up' or 'Arrow Down' button to move the command in the list.
3. Click on 'OK' to confirm your selection.