TRUST 532AV POWER VIDEO
24
7.7
Webcam & Internet
The camera can also be used as a webcam, for example, on your Internet page.
A number of informative sites about webcams are given below:
http://www.camarades.com
http://www.teveo.com
At these sites, you can download software that you can use to send live video
images over the Internet.
Please refer to the sites concerned for information on how to install and use the
software.
8 Troubleshooting
Method
1.
Read the solutions given below.
2.
Check for up-to-date FAQ’s, drivers and instruction
manuals on the Internet (www.trust.com/13338)
Problem
Cause
Possible solution
The computer's USB
port does not work.
Check the settings of your USB
port. For more information, see
www.trust.com/customercare/help/u
sb.
The camera has not
been connected to a
USB port.
Connect the camera to a USB port.
Windows does
not detect a new
device after
connecting the
camera.
The camera has been
connected to a USB
hub which does not
have a power supply.
Connect the camera to a USB hub
which has a power supply or to a
USB port on your computer.
Where can I find
the serial number
for VideoLive
Mail?
This is printed on the
CD box or the CD
envelope.
Find the original CD-ROM and look
at the box or the envelope.
The camera has not
been connected to a
USB port.
Connect the camera to a USB port.
The camera is in the
‘DV disk’ mode.
Set the camera to the ‘Live’ mode
(see figure 8).
Error message
‘Capture device
was not detected’
is displayed.
The camera has been
connected to a USB
hub which does not
have a power supply.
Connect the camera to a USB hub
which has a power supply or to a
USB port on your computer.
!
