TRUST 532AV POWER VIDEO
21
U K
‘
’ to send the recording by e-mail. An *.exe file will be created which
also contains the code to play the file. This is necessary to be sure that the
recipient can view the message without having to install any extra
programs.
11.
The e-mail window will appear. You must fill in an e-mail address.
12.
Click on ‘Send’.
13.
Click on ‘Finish’ to close the Wizard.
Tip:
This program has many more functions and possibilities. For more
information, please see this program’s Help function.
1
Start Recording
Wizard
A useful tool to easily compose a video mail.
2
Settings
For altering the settings of the video camera
and the microphone.
3
Start recording
Starts recording audio and video.
4
Play recording
Plays the recording so that you can check it.
5
Pause
Stops playing the recording. The recording can
be restarted from the same point.
6
Stop
Stops playing the recording. The recording will
start from the beginning when the play button is
pressed again.
7
Send mail
Sends the message by e-mail.
8
Open video file
Opens a previously recorded file.
9
Save video file
Saves the current video recording on your
computer.
10
Speaker volume
Adjusts the volume whilst playing.
11
Microphone sensitivity
Adjusts the sensitivity of the microphone. The
sensitivity cannot be adjusted when using the
camera as a microphone. This is then set
automatically.
12
Close
Closes VideoLive Mail.
13
Minimize
Hides the window, although the program
remains active.
14
Help
Starts the Help function. Gives information
about how to use the program.
Table 13: Meaning of the components included in the program
7.5 DVD
MovieFactory
This program can be used to quickly compose a video film and make it suitable for
saving on a CD-ROM or DVD. You require a CD-writer or a DVD-writer to save the
video on disk. You can also send the file via the Internet. If you have a CD-writer or
a DVD-writer, you can create CD-ROM’s and DVD’s which can be played on most
home DVD players.
1.
Start the program by clicking on ‘Start -> Programs -> ULEAD DVD
MovieFactory SE -> ULEAD DVD MovieFactory SE’. A window will appear
once in which you must input the country you are located in or the video
system.
2.
Select the bottom option and then select ‘PAL’.
