background image

17

16

Where do I place the SensorPod

?

Anywhere you want to measure the humidity within the room.
For optimal results, place the SensorPod

 up to 33ft (10 m) away from the 

humidifier on a counter or table, within line of sight of the humidifier. In Auto 
Mode, the humidifier will work to distribute humidity until the SensorPod 
reads an acceptable level.

How often do I need to change the 
filter?

That’s easy! The humidifier’s replacement indicator will notify you when it is 
time to replace the water softening filter. Plan on replacing the water filter 
every 3-4 months, with normal use of 8 hours per day and average hardness 
of water.

How often do I need to replace the 
aromatherapy pad?

The humidifier comes with one aroma pad. Replace as needed.

Humidifier won’t turn on.

Check that the power cord is connected securely to both the wall outlet 
and the humidifier. Check if there is a power outage in the outlet by trying a 
nearby light or device, or by trying a working device in the same outlet.

Check that there is water in the tank, and consider filling the tank to the 
“Max” indicator line.

Please contact us if you’re still having a problem (page 19).

FAQ & TROUBLESHOOTING

WEEKLY MAINTENANCE

MAINTENANCE BEFORE STORING

Water Tank 

1. Empty all water out of the tank.
2.  Remove filter from tank, and tightly secure the gray cap onto the tank. 
3. Add 2 cups of distilled white vinegar and 2 cups of water to the tank.
4. Gently shake the water tank to coat the inner sides of the tank.
5. Allow the vinegar and water to soak inside the tank for 30 minutes.
6.  Dampen a soft cloth with undiluted white vinegar and wipe 

thoroughly around the tank and the outside of the filter.

7. Rinse with clean warm water to remove the mineral scale and vinegar.
8. Dry with clean cloth.

Base Reservoir

1.  Empty the water by pouring out the left side of the base, to avoid 

splashing onto control panel or power cord inlet.

2. Remove the covers of the UV-C chamber and PTC heater.
3.  Pour 20 fl oz cup of distilled white vinegar into the reservoir, making 

sure that the atomizer, UV-C chamber and PTC heater are submerged 
in vinegar. Allow the vinegar to soak for 30 minutes, and then carefully 
empty the vinegar by pouring out of the left side of the base.

4.  Dampen a soft cloth with undiluted white vinegar and gently wipe the 

reservoir, including all components.

5.  Rinse thoroughly with clean water and dry with a clean cloth.

Follow weekly maintenance instructions above. Let the humidifier dry completely 
before storing. Do not store with water inside the tank or base reservoir. Store in a 
cool dry place. Clean the humidifier before the next season begins.

UV-C

chamber

Atomizer

PTC heater

Summary of Contents for N-300












Reviews: